- FDP-400
- 【Bref】：
Product feature
5. Push and pull the slide by the sliding sliding friction to the rolling wheel friction, reducing the power loss.
1. The rig has strong power, with two engines to ensure the safety of the construction.
2. Equipped with hydraulic valve group with both electric and manual functions.
3. Using three claw closed structure, more conducive to the reliability of drill pipe shackle.
4. Clamping the whole activities of the deduction, you can ensure that the drill pipe joints in any position of the withdrawal.
6. Equipped with a crane to facilitate the construction of the drill pipe and the expansion of the handling. - 【Séries】：Horizontal Directional Drilling Rig
|
FDP-400 Horizontal Directional Drilling Rig Parameters |
|
|
Main Drilling Rig |
|
|
Max Feed Thrust / Feed Pull |
4000KN |
|
Feed Thrust/ Feed Pull System |
Pinion and rack type, moving with 6 gears driving with two-speed gear shift, step less speed regulating Ⅰ shift: 7.5m/min Ⅱ shift: 32m/min |
|
Rotation Driving |
Gear transmission, step less speed regulating Ⅰshift hollow spindle torque: 98000N·m@42r/min Ⅱshift hollow spindle torque: 49000N·m@84r/min |
|
Motor |
|
|
Manufacturer |
Weichai Power Co., Ltd |
|
Rated Value of Motor |
552kW |
|
Operational State |
Thrust / Pull and rotation all can reach above mentioned max performance index |
|
Operator's Cab |
|
|
Equipped with Air-Conditioner |
|
|
Environmental Standard and Service |
|
|
Engine emissions and noise meeting European II standard |
|
|
Mast Entrance Oblique Angle |
|
|
8°~ 16° |
|
|
Shackles |
|
|
Clamp holder centering by it, Shackles full distance moving |
|
|
Clamper / Break-out Tong |
Distance adjustable with accurate, stable and reliable breaking- out |
|
Max make-up Torque |
110000N·m |
|
Max break-out Torque |
220000N·m (It can be designed according to the requirement of client.) |
|
Mast |
|
|
Length of mast 16.5 meters |
|
|
Hydraulic Mud Pump |
|
|
Full Hydraulic driving, flux step less adjustable |
|
|
Flux Rate |
0-2200L/min |
|
Pressure |
0-10MPa |
|
Chassis |
|
|
Track Caterpillar Assembly Type |
|
|
Drilling Tool |
|
|
Drilling Rod |
5", 5 1/2" |
|
Reaming Shell (cutting type) |
Ф425, Ф530, Ф680, Ф760, Ф900, Ф1100, Ф1350mm |
|
Dimension and Gross Weight |
|
|
Dimension (L×W×H) |
17.17×3.25×3.45m |
|
Gross Weight |
52000kg |
|
Accessory |
|
|
Pressure, flux rate, and revolution and other more than ten data will be shown in figures. This is easy for analysis and judgment of problems and conditions in the performance process. |
|
